felix fridman logo

Do It Yourself - "OLEN" - Hanger

Olen is clothing holder made from Sp pipe those pipes used in domestic pluming and contains 3 layers of Polyethylene and aluminum in the middle, which allows the pipe to be strong but flexible. This object can easily changed to suit your personal needs.

1.
We should cut 6 pc of wood or MDF at least 15 mm thickness. 2pc of 15 by 15 – 2* thickness (for example plywood of 17 mm will be 15-1.7*2=11.6) 2 pc of 25 by 15 cm + thickness (for example plywood of 17 mm will be 15+1.7 =16.7) One pc of 25 by 15 cm One pc of 15-2*width by 25-2* width(15-2*1.7 by 25-2*1.7 = 11.6 by 21.6) You can cut using jigsaw or by ordering from carpenter or in the wood store, usually The price for cutting for you is nor expensive and will be more precise.

2.
Drill the hole according to drawing diameter hall is according to sp pipes diameter

3.
Attach the parts together you can do it by nails glue or screws, always use glue additionally (its better to use carpenter yellow glue but you can also use white paper glue). Do not attach blue part, it will be attached to the wall and then the object will be attached to it.

4.
Cut 5 pc of sp pipe better to use sp 20mm diameter or more 3pc by 95 cm 1 pc by65 cm 1by 140 cm

5.
Insert the pipes and bend them as on picture or in any other way that will make this holder you personal.

6.
You can modify the object by adding color or texture or wallpaper to unify it with the wall surface.

horns hanger
horns hanger
horns hanger
horns hanger
horns hanger
horns hanger
horns hanger